Fujitsu ETERNUS DX8100 S3 - Page 90

Chapter 3 Component Status
3.2 Controller Enclosure
ETERNUS Web GUI User’s Guide (Operation)
Copyright 2016 FUJITSU LIMITED P2X0-1260-19ENZ0
90
■ For the other models
The following items are displayed in the Main area:
• Enclosure
The CE number is displayed.
This item is displayed for the ETERNUS DX8700 S3/DX8900 S3.
• CM
The CM number is displayed.
• CA
The CA number is displayed.
• Port
The port number is displayed.
• Port Mode
The port mode is displayed.
- CA
- RA
- CA/RA
• Read IOPS
The number of reads per second is displayed.
• Write IOPS
The number of writes per second is displayed.
• Read Throughput
The amount of data that is read per second is displayed.
• Write Throughput
The amount of data that is written per second is displayed.