CHAPTER 3
Small Configuration
Installing the LAS2 Shelf
FNC-7500-0061-200
Issue 1, May 2009
FLASHWAVE 7500 Release 6.1
Equipment Installation
3-76
Fujitsu and Fujitsu Customer Use Only
Figure 3-64 [p. 3-76] shows a right-side view of the FC9682LAS2 shelf after the flange is
mounted.
12 Install the FC9682LAS2 shelf in the rack. Secure the shelf to the rack using three rack
mounting screws on each side of the shelf.
Note: If hole alignment does not permit three screws on each side, securing the shelf with only two
screws on each side is acceptable.
This procedure is complete.
Figure 3-64: Flange Mounted on Right Side of FC9682LAS2 Shelf (23-Inch Rack Installation)
To Next Page
Loading...