CHAPTER 3
Small Configuration
Installing the LAM/DCM Shelf (SDL1)
FNC-7500-0061-200
Issue 1, May 2009
FLASHWAVE 7500 Release 6.1
Equipment Installation
3-78
Fujitsu and Fujitsu Customer Use Only
Install the SDL1 shelf as follows:
1 Unpack the SDL1 shelf from the shipping container.
2 Get the flange kit for Small rack mounting (FC9682FLG5), see Section 3.3.2, Flange Kits for
19-Inch and 23-Inch Racks [p. 3-18].
Figure 3-66: SDL1 Shelf Mounting in Small Rack
Top View of 19-Inch Shelf
Top View of 19-Inch Shelf
Installed in 19-Inch Rack
19-Inch Rack
Left Shelf
Flange
Right Shelf
Flange
m1656sk_3
To Next Page
Loading...