CHAPTER 3
Small Configuration
Installing the LAM/DCM Shelf (SDL1)
3-79
FLASHWAVE 7500 Release 6.1
Equipment Installation
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009
3 Identify the shelf flanges. See Figures 3-66 [p. 3-78] and 3-67 [p. 3-79].
Note: The layout of the clearance holes is identical for the two flanges for Small rack mounting.
Figure 3-67: SDL1 Shelf Mounting Flanges (Front View)
Left Shelf Flange Right Shelf Flange
m1718rj_1
To Next Page
Loading...