CHAPTER 3
Small Configuration
Installing Cables
3-113
FLASHWAVE 7500 Release 6.1
Equipment Installation
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009
1 Connect the HK1 input housekeeping cable to backplane connector CN41 (Main Optical
shelf), and secure in place using retaining screws. See Figure 3-83 [p. 3-109].
Note: The far end of 21-626-xxx is not terminated with a connector.
Figure 3-86: Connector Pinouts, HK2 Cable
To Next Page
Loading...