CHAPTER 4
ETSI Configuration
Installing Fans, Rack Covers, and End Panels
4-59
FLASHWAVE 7500 Release 6.1
Equipment Installation
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009
11 Clean up the work area.
12 Update office records per local practices.
13 Store the Hex Torx pin tool in a location determined by the site supervisor for easy access for
future maintenance activities.
This procedure is complete.
Figure 4-42: Securing the Upper Cover Panel
r1434_1
See detail A.
Detail A
Secure panel by fastening
captive screw on panel to
pin/socket standoff using
supplied special tool
(2 places).
Hook keyhole feature over hook
on upper standoff (2 places).
To Next Page
Loading...