Fujitsu FLASHWAVE 7500 - Page 283

CHAPTER 4
ETSI Configuration
Installing Power and Ground Cables
4-65
FLASHWAVE 7500 Release 6.1
Equipment Installation
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009
Figure 4-47: Optical/Tributary Shelf Power Cabling
(ETSI Configuration)
Wiring Diagram
Cable Diagrams
FLASHWAVE 7500 SIA, ETSI Configuration
Application
FNC Mfg. Part No.: PC660-0105-T019
Power Cable Assemblies
FLASHWAVE 7500
SIA
Power Distribution Panel
Notes:
The connections to the FLASHWAVE 7500 SIA are
screw terminations at the power terminal. The cable
assemblies shown here provide -48 V DC battery (MAIN A,
MAIN B), battery return (GA, GB), and frame ground (FG).
MAIN A
GA
FG
A1-1 -BATT
A1-1 +RTN
RACK
Gray
Blue
Green/Yellow
Lug, 1/4 in.
This end
terminated at
FLASHWAVE 7500
SIA.
Bagged with Cable
Lug, #10
Terminated at Rack
Part
Numbers
FG
MAIN A G A
MAIN B G B
Rack/Shelf Power Harness (PC660-0105-T020)
Frame Ground Cable (PC660-0105-T021)
Rack/Shelf Power Harness (PC660-0105-T019)
FLASHWAVE 7500
SIA
Power Distribution Panel
MAIN B
GB
B1-1 -BATT
B1-1 +RTN
Gray/White
Blue/White
Green/Yellow
Blue
Gray
FG
MAIN A
GA
MAIN B
GB
G
r
a
y
/
W
h
i
te
B
lu
e
/
W
h
i
te
Green/Yellow
FNC Mfg. Part No.: PC660-0105-T020
FNC Mfg. Part No.: PC660-0105-T021
m1718rn_2
Revision 1, June 2009