CHAPTER 6
Installing/Removing Modules, Filler Panels and Plug-In Units
Installing/Removing Filler Panels
6-9
FLASHWAVE 7500 Release 6.1
Equipment Installation
Fujitsu and Fujitsu Customer Use Only
FNC-7500-0061-200
Issue 1, May 2009
6.4.2 Installing Filler Panels
This procedure provides installation instructions for the filler panels used by the
Optical/Tributary shelf. The filler panels ensure proper airflow throughout the shelf.
Additionally, all unused equipment slots, both half size (see Figure 6-4 [p. 6-9]) and full size
(see Figure 6-5 [p. 6-10]), must be occupied by a filler panel to meet FCC electromagnetic
interference (EMI) compliance requirements.
Figure 6-4: Half-Size Filler Panel
Side View
FILLER PANEL 2
FC9580 FP21
Iss. 01
m1714eh_1
To Next Page
Loading...