About Actions (for Windows Users)
110
3. Change settings for the [Scan to Print] action (If you do not want to
change settings, go to Step 4.).
1. Click the [Application Settings] button.
⇒ The [Scan to Print - Options] dialog box appears.
2. Change settings.
For details about the [Scan to Print - Options] dialog box, refer to ScanSnap Man-
ager Help.
3. Click the [OK] button to close the [Scan to Print - Options] dialog box.
4. Click the [OK] button to close the ScanSnap setup dialog box.
5. Load the document into the ScanSnap.
For details, refer to "Paper Sizes of Documents to Be Scanned" (page 26) and "Loading
Documents" (page 28).
Even if the [Scan] button on the ScanSnap is pressed, the ScanSnap setup dialog box
closes.
To Next Page
Loading...
