About Actions (for Windows Users)
146
Without using the Quick Menu
1. Select [Scan Button Settings] from the Right-Click Menu.
⇒ The ScanSnap setup dialog box appears.
2. In the [Application] drop-down list on the [Application] tab, select
[Rack2-Filer].
• You can set the profile by selecting Rack2-Filer from the [Profile] drop-down list or [Pro-
file] menu.
• Finishing the procedure above, you can save desired settings as profiles. The profiles
can be selected in the Left-Click Menu from the next time you scan documents.
For details about how to save scanning settings, refer to "Saving Scanning Settings"
(page 67).
To Next Page
Loading...
