About Actions (for Mac OS Users)
241
Without using the Quick Menu
1. From the ScanSnap Manager menu, select [Settings].
⇒ The ScanSnap setup window appears.
2. In the [Application] pop-up menu on the [Application] tab, select [Scan to
Print].
• The profiles can also be set by selecting [Scan to Print] from the [Profile] pop-up menu
or the [Profile] menu.
• Finishing the procedure above, you can save desired settings as profiles. The profiles
can be selected in the [Profile] menu from the next time you scan documents.
For details about how to save scanning settings, refer to "Saving Scanning Settings"
(page 206).
To Next Page
Loading...
