5
2 Configuration Flow
For the device configuration flow, see Figure 2-1. For details, see Table 2-1. Configure the
device according to the actual situation.
Figure 2-1 Configuration flow
Table 2-1 Description of flow
Open IE browser and enter IP
address to log in to the web
interface, The camera IP address
is 192.168.1.108 by default.
Initialize the camera when you
use it for the first time.
Modify IP address according to
network planning for the first use
or during network adjustment.
Set date and time to ensure the
recording time is correct.
Adjust image parameters
according to the actual situation to
ensure the image quality.
Configure the necessary detection
rules, such as video detection and
IVS.
Subscribe alarm event. When the
subscribed alarm is triggered, the
system will record the alarm on
the alarm tab.
To Next Page
Loading...
Need help?
General