Galaxy Hunter Series User Manual

125
Select the Enable Defocus Detection check box: The alarm is triggered when the
image is fuzzy. This function is available on some select models.
Step 3 Click Save.
5.4.3 Setting Scene Changing
The system performs alarm linkage when the image switches from the current scene to another
one.
Step 1 Select Setting > Event > Video Detection > Scene Changing.
The Scene Changing interface is displayed. See Figure 5-18.
Figure 5-18 Scene changing
Step 2 Set arming periods and alarm linkage action. For details, see "5.1.1 Alarm Linkage."
Step 3 Click Save.
5.5 Setting Smart Motion Detection
The system performs alarm linkage when human, non-motorized vehicle, or motor vehicle
appear on the image and its moving speed reaches the preset sensitivity. Enabling smart
motion detection can avoid the alarms triggered by the environment changes, and the function
is enabled by default.
Preparation
 Select Setting > Event > Video Detection > Motion Detection to enable Motion
Detection.

Galaxy Hunter Series Specifications

General

Brand	Galaxy
Model	Hunter Series
Category	Network Hardware
Language	English