160
To view alarm information on the Alarm tab, subscribe relevant alarm event. For details,
see "5.1.2 Subscribing Alarm."
Verification
You can view the queuing result on the Live interface. See Figure 5-56.
The queuing number and the stranding time of each target are displayed on the interface.
Figure 5-56 Queuing result
5.12.3 Viewing People Counting Diagram
You can search and export the heat map and tracking map according to the set searching
criteria. This function is available on some Fisheye camera.
Step 1 Select Setting > Event > People Counting > Diagram.
The Diagram interface is displayed. See Figure 5-57.
To Next Page
Loading...
Need help?
General