180
Figure 5-77 Voltage detection
Step 2 Select the Enable check box to enable the voltage detection function.
Select Overlay, and the alarm icon is displayed by overlapping when the alarm is
triggered. indicates undervoltage and indicates overvoltage.
Step 3 Set alarm linkage actions. For details, see "5.1.1 Alarm Linkage."
Step 4 Click Save.
5.18.5 Setting Security Exception
When a hostile attack is detected, the system performs alarm linkage.
Step 1 Select Setting > Event > Abnormality > Security Exception.
The Security Exception interface is displayed. See Figure 5-78.
Figure 5-78 Security exception
Step 2 Select the Enable check box to enable the security exception detection function.
Step 3 Set alarm linkage actions. For details, see "5.1.1 Alarm Linkage."
Step 4 Click Save.