Galaxy Hunter Series User Manual

164
Procedure
Step 1 Select Setting > Event > Heat Map > Heat Map.
The Heat Map interface is displayed. See Figure 5-60.
Figure 5-60 Heat map
Step 2 Select the’ Enable check box to enable the heat map function.
Step 3 Set the arming period. For details, see "5.1.1.1Setting Period."
Step 4 Click Save.
5.13.2 Viewing Heat Map Report
The system can export heat map data as a report.
Step 1 Select Setting > Event > Heat Map > Report.
The Report interface is displayed. See Figure 5-61.
Figure 5-61 Heat map report
Step 2 Set the start time and end time.
Only some devices support heat map sequence numbers.
Step 3 Click Search to complete the report.
Click Export to export the statistical report.

Galaxy Hunter Series Specifications

General

Brand	Galaxy
Model	Hunter Series
Category	Network Hardware
Language	English