147
Viewing the display on a projector or monitor
www.gateway.com
6 Click the Settings tab.
7 Right-click the second monitor icon (labeled 2), then click Attached.
8 Click Apply.
9 Adjust properties such as Screen Resolution or Color Quality if necessary.
10 Click OK.
Important Press FN+LCD/CRT to switch between viewing the
display on the LCD panel and viewing the display on the
projector or monitor.
Important If an external monitor or projector is connected and you
close the LCD panel, your notebook turns off the LCD
panel, but does not enter Standby mode.
To Next Page
Loading...
