234
Chapter 15: Upgrading Your Gateway 450
www.gateway.com
Preventing static electricity
discharge
The components inside your notebook are extremely sensitive to static
electricity, also known as electrostatic discharge (ESD).
Before installing memory or replacing the hard drive, follow these guidelines:
■ Turn off your notebook.
■ Wear a grounding wrist strap (available at most electronics stores) and
attach it to a bare metal part of your workbench or other grounded
connection.
■ Touch a bare metal surface on your workbench or other grounded object.
■ Unplug the power cord and the modem and network cables.
■ Remove the main battery and optional secondary battery. For more
information, see “Changing batteries” on page 155.
■ Disconnect all peripheral devices and remove any PC Cards.
Caution ESD can permanently damage electrostatic
discharge-sensitive components in your notebook.
Prevent ESD damage by following ESD guidelines every
time you install memory or replace the hard drive.
Warning To avoid exposure to dangerous electrical voltages and
moving parts, turn off your notebook and unplug the power
cord and modem and network cables before opening the
case.
Warning To prevent risk of electric shock, do not insert any object
into the vent holes of your notebook.
To Next Page
Loading...
Need help?
General
