194
Chapter 11: Networking Your Gateway 450
www.gateway.com
Selecting a network connection
The biggest decision you need to make when creating your network is what
type of connection you will use. Gateway products support wired and wireless
Ethernet networks and powerline networks. Use the following criteria as a guide
when selecting a network connection.
Wired Ethernet network
Create a wired Ethernet network by using special wires to connect all the
computers and devices on your network. Wired Ethernet networks are typically
faster than other network types. Create a wired Ethernet network if:
■ You are building a new home or your existing home already has Ethernet
cable installed in each room that has a device you want to connect
■ You are creating a network in an office or business where network speed
is more important than moving about with your computer
■ Your computer has an Ethernet jack for connecting to the network
Wireless Ethernet network
A wireless Ethernet network is created by using radio emitters that may be
embedded into your computers or plugged into them. Create a wireless Ethernet
(IEEE 802.11a, IEEE 802.11b, or IEEE 802.11g) network if:
■ You are looking for an alternative to installing cable for connectivity
■ The ability to move about with your computer is as important as network
speed
■ Your computer has wireless Ethernet for networking
To Next Page
Loading...
