232
Chapter 15: Upgrading Your Gateway 450
www.gateway.com
Adding and removing a PC Card
Your notebook has a two PC Card slots (also known as a PCMCIA card slots).
These slots accept two Type II cards or one Type III card.
You do not need to restart your notebook when changing most cards because
your notebook supports hot-swapping. Hot-swapping means that you can insert
a PC Card while your notebook is running. If your PC Card does not work after
hot-swapping, see the PC Card manufacturer’s documentation for further
information.
To insert a PC Card:
■ Push the card firmly into the PC Card slot with the label side up until the
outer edge of the card is flush with the side of your notebook.
To Next Page
Loading...
