236
Chapter 15: Upgrading Your Gateway 450
www.gateway.com
3 Disconnect your notebook from the optional port replicator (see “Using
the Gateway 450 Port Replicator” on page 243).
4 Turn your notebook over so the bottom is facing up.
5 Remove the main and secondary batteries. For more information, see
“Changing batteries” on page 155.
6 Loosen the memory bay cover screw. This screw cannot be removed.
7 Remove the memory bay cover.
8 If you are removing a module, gently press outward on the clip at each
end of the memory module until the module tilts upward.
To Next Page
Loading...
