GDC SR-1000 - 8.1.2 LFE Parametric EQ

- 108 -
April 22
nd
, 2021
USER MANUAL FOR SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
8. AUDIO PROCESSING
LFE Parametric EQ
Figure 71: LFE Parametric EQ
1
[Bandwidth (Q)]
Range for Bandwidth value: 0.5 ~ 10Q.
2
[Frequency (Hz)]
Range for Frequency value: 20 ~ 120Hz.
3
[Gain (dB)]
Range for Gain value: -12 ~ +6dB.
4
[Low pass filter]
You can choose the optimized ‘Default’ low-pass filter or ‘SMPTE’
defined low-pass filter.
5
[Phase Invert]
You can switch Phase Invert On or OFF. This option inverts the
phase of the LFE channel which is used to check if the subwoofer
is in phase with the Center channel or not.
1
2
3
4
5