GDC SR-1000 - 5 AUTOMATION; 5.1 Triggering Automation Cues

- 26 -
April 22
nd
, 2021
USER MANUAL FOR SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
5. AUTOMATION
This tab is used to set up automation and input triggers. Scheduling and manual triggering of
automation cues can be done here.
Figure 13: GDC Automation Workflow
5.1 Trigger
The Trigger sub-tab is used manually trigger automation cues and commands
for configured devices.
1
2
Figure 14: Cue Trigger Setup
3