GDC SR-1000 - Page 87

- 86 -
April 22
nd
, 2021
USER MANUAL FOR SR-1000 STANDALONE INTEGRATED MEDIA BLOCK™
7. CONFIGURATION
Note: This option should ONLY be used when ‘CineCache’ is
chosen as the primary storage in Storage Type and the Priority
is set to ‘Attached Storage’ (for centralized playback with
SCL Servers
*
.
In case, the Storage Type chosen is ‘Portable/Enterprise
Storage’, content ingest will take place at normal speed.
4
[Portable/Enterprise Storage]
The following actions can be performed:
• Create new RAID array
• Hard disk information
• RAID filesystem check
• Storage performance
• Increase Rebuild Speed
• High bitrate playback test
(Refer to Section 7.3.1 for more details on the
above-listed actions)
* SCL or Streaming Content Library Servers, which are used in the GDC Cinema Automation 2.0 environment.