Available tubes
For Fraction collector F9-R the fractions are collected in tubes of different sizes.
Tubes with the following diameter can be used with Fraction collector F9-R:
•
12 mm
•
18 mm
•
30 mm
The tubes can have a tube length between 50-180 mm.
Illustration of the Fraction collector F9-R Tube
rack
Each tube rack is made up of a combination of a Bowl, Tube support, Tube guide and Tube holder. For
more information on the assembly of the tube rack, see Assemble the Tube rack, on page200. For infor-
mation on which Tube rack to use, see Tube rack inserts, on page 201.
FunctionPart
Single cutout1
L-shaped cutout2
Bowl3
Tube support4
Tube guide5
Tube holder6
Note that the tube guide has both single and L-shaped cutouts, while the tube holder only has
single cutouts. See Single and L-shaped cutouts, on page 201 for more information.
Note:
106 ÄKTA pure User Manual 29119969 AB
3 ÄKTA pure external modules
3.3 Fraction collector F9-R
To Next Page
Loading...
