ActionStep
Insert the waste tubing from all installed modules, in this example Injection valve, Outlet
valve (W, W1 and W2) and the fraction collector, in a vessel.
1
Make sure that the tubing is securely fastened to the ÄKTA pure instrument:2
•
Fasten waste tubing from the valves with the clips on the front of the system.
•
Fasten waste tubing from the Buffer tray with the clips on the rear of the system.
156 ÄKTA pure User Manual 29119969 AB
5 Operation
5.2 Prepare the flow path
To Next Page
