Label inModule
ÄKTA pure 150ÄKTA pure 25
C9C9Conductivity monitor
L9-1.5L9-1.5External air sensor
L9-1.2L9-1.2
F9-CF9-CFraction collectors
F9-RF9-R
E9E9I/O-box
S9HS9Sample pump
Illustration convention
In the valve illustrations below, the following convention is used to point out the location of the ports
on the valve head. Loop valve V9-L is used as an example.
3E
3F
V9-L
1
E
2
E
4
E
5
E
5
F
4
F
2
F
1
F
E
F
•
Ports located on the valve head rim are indicated outside the black
ring (e.g., 1E, 2E, etc.).
•
Ports located on the pivot part of the valve head are indicated on
the inside of the black ring (e.g., 3E and 3F).
•
Ports located on the valve head front are indicated by an arrow
(e.g., E and F).
Core modules
DescriptionCore module
A high precision pump, which delivers buffer or sample in purification runs.System pump P9 A or P9H A
For further information, refer to Section 2.4.1 System pumps, on page 34.
18 ÄKTA pure User Manual 29119969 AB
2 The ÄKTA pure instrument
2.1 Overview illustrations
To Next Page
Loading...
