Then..If you se-
lect..
the method will be adapted to the new set of components. All functions and positions
that are still available will be unchanged. For example, valve positions present on
both the original and the new system will be unchanged in the adapted method.
Non-compatible settings will be adjusted in order to properly adapt the method for
new components. Settings that have been changed are described and saved in
Method Notes, which are displayed after the method has been adapted.
Adapt
method
Change the settings in Phase Properties if required.
Note:
Some predefined methods require certain components to be functional. Adapting
these methods to systems that do not include the required components is not possible.
the text method will be kept and nothing will be changed. Non-compatible settings
will still be present in the method but they will not be functional. All Phase Properties
of the method will be replaced by tables of Phase Variables.
Keep text
method
216 ÄKTA pure User Manual 29119969 AB
5 Operation
5.9 Create a method and perform a run
5.9.1 Create a method
To Next Page
Loading...
