GE AKTApure - Page 223

Log off or exit UNICORN
Follow the instructions to log off or exit UNICORN. This can be performed from any of the UNICORN
modules.
then...If you want to...
on the File menu, click Log off.log off UNICORN
Result: All open UNICORN modules close and the Log On dialog box
opens.
on the File menu, click Exit UNICORN.exit UNICORN
Result: All open UNICORN modules close.
If an edited method or result is open and not saved when you try to exit or log off UNICORN,
you will see a warning. Click Yes to save, No to exit without saving, or Cancel to stay logged
on.
Note:
ÄKTA pure User Manual 29119969 AB 223
5 Operation
5.9 Create a method and perform a run
5.9.4 After run procedures