Create a System CIP method
Follow the instruction below to create a System CIP method.
ActionStep
In the Method Editor module,1
•
click the New Method icon
or
•
select File:New Method.
Result: The New Method dialog opens.
In the New Method dialog, select System and then System CIP in the Predefined Method
drop-down list. Click OK.
2
Result: One Method Settings phase and three System CIP phases show in the Method
Outline pane. Each System CIP phase uses one cleaning solution.
If desired, add additional System CIP phases to the method using the Phase Library.3
ÄKTA pure User Manual 29119969 AB 279
7 Maintenance
7.6 Maintenance when required
7.6.2 Perform System CIP
To Next Page
Loading...
