Create a Column CIP method
Follow the instruction below to create a Column CIP method.
ActionStep
In the Method Editor module,1
•
click the New Method icon
or
•
select File:New Method.
Result: The New Method dialog opens.
In the New Method dialog, select System and then Predefined Method and Column CIP.
Click OK.
2
Result: One Method Settings phase and one Column CIP phase will be displayed in the
Method Outline pane.
In the Phase Properties tab of the Method Settings phase, select Column type and Col-
umn position.
3
ÄKTA pure User Manual 29119969 AB 285
7 Maintenance
7.6 Maintenance when required
7.6.3 Perform Column CIP
To Next Page
Loading...
