GE AKTApure - Page 421

Tubing connectors
The table below shows the tubing connectors used in ÄKTA pure.
Use with tubing...Description
•
PEEK, o.d. 1/16", i.d. 0.25 mm
•
PEEK, o.d. 1/16", i.d. 0.50 mm
•
PEEK, o.d. 1/16", i.d. 0.75 mm
•
PEEK, o.d. 1/16", i.d. 1.0 mm
•
ETFE, o.d. 1/16", i.d. 1.0 mm
Fingertight connector, 1/16"
ETFE, o.d. 1/16", i.d. 0.75 mmTubing connector 5/16" +
Ferrule (blue), 1/16"
FEP o.d. 3/16" i.d. 2.9 mmTubing connector 5/16" + ferrule (blue)
3/16"
FEP, o.d. 1/8", i.d. 1.6 mmTubing connector 5/16" +
Ferrule (yellow), 1/8"
Other connectors
The table below shows other connectors used in ÄKTA pure.
Scope of useDescription
Stop plug for valve portsStop plug 1/16"
Syringe connector for pH valve and Injection valveLuer female
ÄKTA pure User Manual 29119969 AB 421
9 Reference information
9.3 Tubing and connectors