GE AKTApure - Page 422

Tubing labels
The illustration below shows the tubing labels for for a typical system configuration.
W1 W2
W
A1
A2
B1
B2
InA
InS
S1
1A1
1A2
1B1
1B2
2B
2A
3
4
6
7
9
Out1
Frac
8
5
InB
1S1
1S2
2S
3S
Inlet tubing
The table below shows the labels, standard diameters, and standard lengths of the inlet tubing.
Volume (ml)Length
(mm)
TubingDescriptionLabel
ÄKTA pure 150ÄKTA pure 25ÄKTA pure 150ÄKTA pure 25
9.93.01500FEP, o.d. 3/16",
i.d. 2.9 mm
FEP, o.d. 1/8",
i.d. 1.6 mm
Inlets to Inlet valve
AB
A1-A2
and
B1-B2
9.93.01500FEP, o.d. 3/16",
i.d. 2.9 mm
FEP, o.d. 1/8",
i.d. 1.6 mm
Inlets to Inlet valve AA1-A7
9.93.01500FEP, o.d. 3/16",
i.d. 2.9 mm
FEP, o.d. 1/8",
i.d. 1.6 mm
Inlets to Inlet valve BB1-B7
2.00.6300FEP, o.d. 3/16",
i.d. 2.9 mm
FEP, o.d. 1/8",
i.d. 1.6 mm
From Inlet valve A or
Inlet valve AB to Sys-
tem pump A
InA
2.00.6300FEP, o.d. 3/16",
i.d. 2.9 mm
FEP, o.d. 1/8",
i.d. 1.6 mm
From Inlet valve B or
Inlet valve AB to Sys-
tem pump B
InB
422 ÄKTA pure User Manual 29119969 AB
9 Reference information
9.3 Tubing and connectors