Volume (ml)Length
(mm)
TubingDescriptionLabel
ÄKTA pure 150ÄKTA pure 25ÄKTA pure 150ÄKTA pure 25
6.62.01000FEP, o.d. 3/16",
i.d. 2.9 mm
FEP, o.d. 1/8",
i.d. 1.6 mm
Inlets to Sample inlet
valve V9-IS or V9H-IS
S1-S7
6.62.01000FEP, o.d. 3/16",
i.d. 2.9 mm
FEP, o.d. 1/8",
i.d. 1.6 mm
Inlet to Sample inlet
valve V9-IS or V9H-IS
Buff
3.81.2580FEP, o.d. 3/16",
i.d. 2.9 mm
FEP, o.d. 1/8",
i.d. 1.6 mm
From Sample inlet
valve V9-IS or V9H-IS
to Sample pump S9
or S9H, respectively
InS
Narrow inlet tubing, ETFE, o.d. 1/16", i.d. 0.75 mm, is available for S1-S7.
Note:
High pressure tubing
The tables below shows the labels, standard diameters, and standard lengths of the standard high
pressure tubing and the optional high pressure tubing.
Standard high pressure tubing
Volume (μl)Length
(mm)
TubingDescriptionLabel
ÄKTA pure 150ÄKTA pure 25ÄKTA pure 150ÄKTA pure 25
270150340PEEK, o.d.
1/16", i.d. 1.0
mm
PEEK, o.d.
1/16", i.d. 0.75
mm
System pump A left
to Restrictor A
1A1
270150340PEEK, o.d.
1/16", i.d. 1.0
mm
PEEK, o.d.
1/16", i.d. 0.75
mm
System pump A right
to Restrictor A
1A2
9050115PEEK, o.d.
1/16", i.d. 1.0
mm
PEEK, o.d.
1/16", i.d. 0.75
mm
Restrictor A to Pres-
sure monitor
2A
270150340PEEK, o.d.
1/16", i.d. 1.0
mm
PEEK, o.d.
1/16", i.d. 0.75
mm
System pump B left
to Restrictor B
1B1
270150340PEEK, o.d.
1/16", i.d. 1.0
mm
PEEK, o.d.
1/16", i.d. 0.75
mm
System pump B right
to Restrictor B
1B2
ÄKTA pure User Manual 29119969 AB 423
9 Reference information
9.3 Tubing and connectors
To Next Page
Loading...
