DescriptionInstruction name
Stop volume count stops the volume counter function. The
counted volume is stored in the memory and can be recalled with
the instruction Hold counted volume. The counted volume can
also be recalled in following runs and is stored until a new Stop
volume count instruction is issued.
Stop volume count
This instruction is best used in combination with Watch instruc-
tions.
Hold counted volume sets the system to Hold. The system will
remain in the state Hold until the accumulated volume reaches
the volume stored by the instructions Start volume count / Stop
volume count.
Hold counted volume
Method progressing flowMethod progressing flow
defines the flow from which the volume base is calculated. When
set to Automatic, the position of the injection valve determines if
the system flow or the sample flow is used.
486 ÄKTA pure User Manual 29119969 AB
9 Reference information
9.9 Manual instructions
9.9.9 Manual instructions - Advanced
To Next Page
Loading...
