D20/D200
Installation and Operations Guide
GE Energy
994-0078-2.00-7 General
104
Full
D20/D200 Software Configuration, continued
Procedure (continued)
Step Action
Download Code File (continued)
15
Type el /p to display the error log.
Result:
The D20M> prompt should return, indicating no errors found.
Errors?
Record error(s), and re-try download.
If errors persist, contact GE Energy for support.
16
Type el /r to clear the error log, even if there are no errors displayed in
the previous step.
17
Type Boot to restart device.
Result: Code
File Load
Completed
The flash memory of the D20ME now has a fully operational code, or firmware, file
loaded.
Note:
You will now have to download a configuration file, since it was
overwritten at Step 3. See “Configuration File Download”, page 107.
To Next Page
Loading...
