GE Energy
D20/D200
Installation and Operations Guide
General 994-0078-2.00-7
Full
105
D20/D200 Software Configuration, continued
Procedure:
Code Download
CCU Base
To download of a flash code file to a CCU type of D20ME module.
Step Action
Code Download for CCU Base type D20ME
1
Restart the D20ME.
2
When messages appear on the monitor, press
SPACEBAR within 5
seconds.
Result:
You are prompted with the message: “Are you sure you wish to
abort the flash boot? (y/n)”
.
3
Type y (or Y) to abort the normal startup.
4
Press
ENTER.
Result:
The login dialog appears.
5
To login: for Login: type westronic and press
ENTER, then for
Password: type rd and press
ENTER.
Result:
After a Welcome message, the D20MES> prompt will appear.
6
Type sp to suspend all processes running on the D20ME
7
Type erase to clear the flash. This will take several seconds.
Result:
The monitor will display, before returning the D20MES>
prompt:
Erasing FLASH memory <
\ Checking FLASH contents… \
Continued on next page
To Next Page
Loading...
