User Manual Druck DPI620 Genii
3. Setup a channel for measurement.
• DIRECTION selects source or measure for
the selected function
• FUNCTION selects the function required (eg Current
or Voltage). For more options scroll down the menu
by swiping the display from bottom to top.
• UNITS selects the type of unit required, (eg Hz, kHz),
please note that there may only be 1 type of unit
available in particular Functions.
• UTILITY selects the required utility (Refer to section
2.2 for details).
• CAPTION allows the user to change the caption, if
required.
4. Once all settings have been selected, press the
button at the bottom of the screen to return to the
TASK SETTINGS screen.
Please note for the settings to be set the user must
also press the
button in the TASK SETTINGS menu.
5. Repeat the above if another channel is required.
06 June 2013 K0541 issue 1 Page 36 of 175
To Next Page
Loading...
