User Manual Druck DPI620 Genii
• STORAGE AREA
Used to set Internal or SD card storage. Only the
SD card can be read when connected to a PC.
• FILENAME
Enter the filename (10 characters maximum)
• TRIGGER
Select one of the following:
Key Press (logs one data point each time
the button is pressed)
Periodic (logs one data point at a set time
interval)
• PERIOD
Used to set the time interval for periodic data
logging
• TRANSFER WHEN COMPLETE
Used to transfer data to a Flash Drive
To start Data Logging Mode:
1. Select appropriate options and enter filename for
Data Log file.
2. Select the button.
06 June 2013 K0541 issue 1 Page 78 of 175
To Next Page
Loading...
