User Manual Druck DPI620 Genii
• ERROR TYPE – The deviation from which the
transfer characteristic is to be
calculated. This can be one of the
following:
% Span - a percentage of the Input signal span.
% Rdg - a percentage of the Input signal reading.
• LINEARITY - The transfer characteristic from
Reference to Input signal. This can be
one of the following:
Linear - a proportional response.
Square Root - often found in flow sensors.
• TOLERANCE – The test limits for the deviation from the
transfer characteristic.
06 June 2013 K0541 issue 1 Page 88 of 175
To Next Page
Loading...
