104 GE INFORMATION D20E ETHERNET I/O MODULE INSTRUCTION MANUAL
CHAPTER 9: USING THE D20E MODULE
Side panel
The side panel LEDs and connectors (see Figure 25) are common to all D20E module types.
Figure 25: Side panel elements
Connectors on the D20E module side panel provide Ethernet connection and a micro USB
serial port; see
Table 28.
Table 28: Side panel connectors
LEDs on the D20E module side panel indicate the status of LAN1 and LAN2 Ethernet
connections; see
Table 29.
Table 29: D20E Ethernet connection status LEDs
Function DAPserver Studio Description
Designation Default IP address
LAN 1 Ethernet port Eth 0 192.168.0.189 (Active) Identified as eth0/1 in DAPserver Studio.
This a bridged pair of RJ45 10/100BaseT
ports. where each port has a separate
MAC address.
LAN 2 Ethernet port Eth 1 192.168.1.189 (Active)
Micro USB 2.0 serial
port
Accessed by using a USB-to-Micro USB
cable between a PC and the D20E
module for console maintenance.
LED Indicator Color Description
RJ45 LAN 1 and 2 Green LINK
Yellow ACTIVITY
10/100 Mbps LAN #2
LAN #2 switched port
10/100 Mbps LAN #1
LAN #1 switched port
USB 2.0 port
To Next Page
Loading...