74 GE INFORMATION D20E ETHERNET I/O MODULE INSTRUCTION MANUAL
CHAPTER 3: CONFIGURING THE D20E FIRMWARE
Make D20E device setting changes
Device setting changes are made through the Settings menu bar. Refer to the DAPserver
Studio online help for details on the Settings menu bar items:
• General; see DAPserver Studio Settings Menu book > General topic
–General
– Active System Pseudo
– Configuration Management
• Providers; see DAPserver Studio Settings Menu book > Providers topic
–General
–Access Point
–Protocol
–Pseudo
–IED
For detailed information on the Value Types and the specific Provider and Publisher
settings, see Table 15: Provider IO and Publisher Protocol - Value Type: on page 68.
For detailed information on the IO Scale and the specific Provider settings, see Table
16: Provider- IO Scale: on page 68.
• Publishers; see DAPserver Studio Settings Menu book > Publishers topic
–General
–Access Point
–Pseudo
–View
For detailed information on the Value Types and the specific Provider and Publisher
settings, see Table 15: Provider IO and Publisher Protocol - Value Type: on page 68.
To Next Page
Loading...