GE COMPANY
DIRECTION 5472001-1EN, REVISION 6OPTIMA CT680 SERIES AND OPTIMA CT670 INSTALLATION MANUAL
Page 28 Section 2.0 - Introduction
Electrical Tools
Hand Tools
Recommended Levels
• Johnson Magnetic Level, model 7500M -- 225 mm (9 in.)
• Johnson Professional Box Beam Level, model 9624 -- 600 mm (24 in.)
• Digital level with accuracy of ± 0.1º -- 225 mm (9 in.)
• Johnson Professional Box Beam Level -- 1225 mm (48 in.) (Optional)
Personal Safety Equipment
System Cleaners
Purchase Locally:
• Alcohol
• 10% Bleach
• Scrubbing Bubbles bathroom cleaner or equivalent
• Sani-cloth HB
• Incidin Plus
•TriGrene
Other
Purchase locally (available at office supply stores): a China marker or wax marking pencil or
equivalent, any color that is visible on the floor where the system is being installed. Permanent
markers are often used if the lines will be covered by the product.
• DVM capable of reading 0.5 ohms or less • Dale 600 or 601 Leakage meter or
equivalent
• Continuity Tester • Temperature/humidity tool: Oregon
Scientific Wireless Weather Station Model
BAR608HGA or equivalent
• FE Electronic Monitor Static Kit or
equivalent static mat kit with ground wrist
strap (P/N 2220482)
• Ball-peen hammer (1 lb. or 2 lb.) • Diagonal cutting pliers, small and large
• Tongue & groove pliers (large) • Large pry bar 460 mm . 600 mm (18 in. - 24
in.)
• Diagonal cutting pliers, large (to cut 1/0
ground)
• Safety shoes* • LOTO kit -- MUST have tags and
appropriate lock(s)
• Safety glasses*
• Hand Protection (Leather is required when
performing duct work.)
• Hearing protection
• Knee pads or kneeling pad • 2 m (6 ft.) or 4 m (8 ft.) step ladders or
equivalent
• Face Shield
* Required items
To Next Page
Loading...
Need help?
General
