GE PACSystems RX7i

Chapter 1. Introduction
2 PACSystems* RX7i, RX3i and RSTi-EP CPU Programmer's Reference Manual GFK-2950C
1.1 Revisions in this Manual
Rev
Date
Description
C
Feb-
2018
Updated for CPE302 throughout.
Updated SVC_REQ 20 for newly-implemented feature that makes it possible to uniquely
identify remote PROFINET IO faults recorded in the IO Fault Table by Remote Rack,
Remote Slot, Remote Sub-Slot, and Device ID. Requires RX3i firmware version 9.40 or later.
B
Oct-
2017
Added Redundancy and FA_OK System Bits (%S) Section 3.8.1.
A
May-
2017
Changed the document Title and the contact information.
Updated the Titles of the GFK’s wherever applicable.
-
May-
2015
PACSystems RX7i and RX3i CPU Reference Manual GFK-2222U Chapters 5-11 & Chapter
14 form the content of this new manual, the PACSystems RX7i and RX3i CPU
Programmer’s Reference Manual, GFK-2950.
GFK-2222V and later versions defer to GFK-2950 for CPU programming content.