GE PACSystems RX7i

Chapter 9. Diagnostics
GFK-2950C February 2018 453
6) In the Initialize Symbolic Variables dialog box, select how new local symbolic variables will be
initialized and click OK.
Figure 28: Initialize Local Symbolic Variables
7) Notice the change in the DLB Icon and the DLB status in the Status bar.
DLB Block Icon/Status Bar Once Started.
Figure 29: DLB Icon and Status Bar after Execution has Commenced
8) Open the DLB block and place the DLB variables in the Data Watch window to observe their
operation.
Figure 30: Data Watch for DLB Variables
DLB Running