Chapter 9. Diagnostics
420 PACSystems* RX7i, RX3i and RSTi-EP CPU Programmer's Reference Manual GFK-2950C
All Others, CPU Internal System Error
An internal system error has occurred that should not occur in a production system.
Correction
Display the Controller Fault Table on the programmer. Contact Technical Support and give them all
the information contained in the fault entry.
Fault Extra
Data Value
(First Byte)
Specific device is not available in the system.
Data stored on device has been corrupted and is no longer
reliable. Or, Flash Memory has not been initialized.
Error occurred during a read/write of the Flash Memory
device.
Data in Flash Memory is incompatible with the CPU firmware
release due to the CPU firmware revision numbers, the
instruction groups supported, or the CPU model number.
One or more specified items were not found in Flash Memory.