GE PACSystems RX7i - Page 446

Chapter 9. Diagnostics
GFK-2950C February 2018 431
Correction
Correct the problem causing the condition.
40 hex/64 decimal, Output Channel Over Range
The GBC generates this error when the Genius Analog module reports an over-range condition on an
output channel.
Correction
Correct the problem causing the condition.
80 hex/128 decimal, Expansion Channel Not Responding
The CPU generates this error when data from an expansion channel on a multiplexed analog input
board is not responding.
Correction
1) Check wiring to the module.
2) Replace the module.
81 hex/129 decimal, Invalid Data
The GBC generates this error when it detects invalid data from a Genius Analog input block.
Correction
Correct the problem causing the condition.
Low-Level Analog Faults
1, Input Channel Low Alarm
The GBC generates this error when the Genius Analog module reports a low alarm on an input
channel.
Correction
Correct the condition causing the low alarm.
2, Input Channel High Alarm
The GBC generates this error when the Genius Analog module reports a high alarm on an input
channel.
Correction
Correct the condition causing the high alarm.
4, Input Channel Under Range
The GBC generates this error when the Genius Analog module reports an under-range condition on
an input channel.
Correction
Correct the problem causing the condition.
8, Input Channel Over Range
The GBC generates this error when the Genius Analog module reports an over-range condition on an
input channel.
Correction
Correct the problem causing the condition.