80209C_MHW_850-1650-1850_02-2020_ENG_pag. 104
4.11.12. BLK.AL - Flashing of PV display
Acronym Scrolling message Submenu Attributes
BLK.AL ALARM.1 (or ALARM.2…ALARM.4) BLINK DISPLAY PV DEF ALARM R W
The parameter shows and sets the flashing of the PV display in case of alarm, for the alarm being configured.
If the parameter is “On,” the value shown on the PV display starts to flash in case of alarm.
Unit of measurement: -
Options: OFF = PV display does not flash in case of alarm
On = PV display flashes in case of alarm