gefran 1650 - Submenu ENERG - Configuring energy counter parameters

80209C_MHW_850-1650-1850_02-2020_ENG_pag. 160
4.24. Submenu ENERG - Configuring energy counter parameters
Acronym Scrolling message Password Description
ENERG ENERGY COUNTER
MANAGER
Level 2 Lets you configure the energy counter parameters.
The submenu appears if the energy counter function was
enabled on the MODE submenu.
ENRG.N
ENERG
V.LINE
P.LOAD
E.COST
Selecting energy
counter
162
Selecting the output
for energy calculation
162
Nominal line
voltage
162
Nominal power
of load
162
Nominal cost
per kWh
162
Pararmeter Pag.