80209C_MHW_850-1650-1850_02-2020_ENG_pag. 65
4.4.34. P.DAYS - Partial working days
Acronym Scrolling message Submenu Attributes
P.DAYS PARTIAL DAYS OF OPERATION INFO R
The parameter shows the number of working days of the controller since the last counter reset, Each working day equals
24 hours of actual functioning.
The counter can be reset with the Us.cal function.
Unit of measurement: Day
Options: 0...9999
4.4.35. T.INT - Internal temperature of controller
Acronym Scrolling message Submenu Attributes
T.INT INTERNAL TEMPERATURE INFO R
The parameter shows the instantaneous internal temperature of the controller.
Unit of measurement: °C
Options: -
4.4.36. T.MIN - Minimum internal temperature of the controller
Acronym Scrolling message Submenu Attributes
T.MIN MIN INTERNAL TEMPERATURE INFO R
The parameter shows the minimum internal temperature of the controller measured during work.
Unit of measurement: °C
Options: -
4.4.37. T.MAX - Maximum internal temperature of the controller
Acronym Scrolling message Submenu Attributes
T.MAX MAX INTERNAL TEMPERATURE INFO R
The parameter shows the maximum internal temperature of the controller measured during work.
Unit of measurement: °C
Options: -
4.4.38. TIME - Internal time
Acronym Scrolling message Submenu Attributes
tiME INFO R
The parameter shows the internal time in 24-hour format. Hours, minutes and seconds are shown with scrolling text:
hours, minutes and seconds.
Unit of measurement: hh:mm:ss
Options: -
4.4.39. DATE - Internal date
Acronym Scrolling message Submenu Attributes
dAtE INFO R
The parameter shows the complete internal date of the controller: month, day, year, day of week, with scrolling text.
Unit of measurement: MM / DD / YYYY
Options: -
To Next Page
Loading...
Need help?
General
